sp10100 voltage 100 v 10.0 amp schottky barrier rectifiers elektronische bauelemente 13-sep-2010 rev. e page 1 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed individually. rohs compliant product a suffix of ?-c? specifies halogen free features ? low forward voltage drop ? high current capability ? high reliability ? high surge current capability ? epitaxial construction mechanical data ? case: molded plastic ? epoxy: ul94v-0 rate flame retardant ? lead: lead solderable per mil-std-202 method 208 guaranteed ? polarity: as marked ? mounting position: any ? weight: 1.98 grams (approximate) maximum ratings and electrical characteristics rating 25 c ambient temperature unles s otherwise specified. single phase half wave, 60hz, resistive or inductive load. for capacitive load, de-rate current by 20%. type number symbol sp10100 units maximum recurrent peak reverse voltage v rrm 100 v working peak reverse voltage v rsm 100 v maximum dc blocking voltage v dc 100 v maximum average forward rectified current per leg per device i f 5 10 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method) i fsm 130 a maximum instantaneous forward voltage i f = 5 a, t a = 25 c, per leg i f = 5 a, t a = 125 c, per leg v f 0.82 0.70 v maximum dc reverse current at rated dc blocking voltage (note 3) t a =25 c t a =100 c i r 0.05 10 ma typical junction capacitance (note 1) c j 350 pf typical thermal resistance (note 2) r ? c /w dv / dt 10000 v / ? s operating temperature range t j t j -50 ~ +150 c storage temperature range t stg t stg -65 ~ +175 c notes: 1. measured at 1mhz and applied reverse voltage of 5.0v d.c. 2. thermal resistance junction to case. 3. pulse test pulse width = 300 ? s, duty cycle Q 2.0%. 2.9 0.3 4.5 0.2 0.5 0.2 2.6 0.2 2.54 13min 0.2 3.7 0.2 0.7 0.2 2.54 0.2 1.3 0.2 2.7 0.2 15 0.3 10 0.5 3.2 0.2 0.1 pin 1 pin 3 pin 2 case ito-220 dimensions in millimeters
sp10100 voltage 100 v 10.0 amp schottky barrier rectifiers elektronische bauelemente 13-sep-2010 rev. e page 2 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed individually. ratings and characteristic curves (sp10100)
|
